Cromar Aluminium Paint (Contractor Grade)

Cromar Aluminium Paint (Contractor Grade) is an economy version of Aluminium Paint ‐ a bright aluminium, traditional, solar reflective coating suitable for application to bituminous roofing substrates.

This paint can be used on roofs subject to standing in rainwater.

This bright aluminium, traditional paint is ready to use and should not be diluted.

It is additionally used for protection where corrugated iron surfaces, bituminous, and exposed steel are used. This helps prevent softening of asphalt as it does not attack bituminous

substrates. Even where conditions turn to rain before the film has cured, once applied, it is entirely water resistant.

Note:

The appearance of a silver film on the paint’s surface after a short period of stirring does not signify that the paint is thoroughly uniform. It is advisable to stir for several minutes to ensure

complete dispersion. Preference should be given to mechanical stirring.

Two coats should be applied, the first being allowed to dry before the second application.

Coverage:

5 litres covers between 25 m/2 – 50 m/2 overall so 2 coat coverage = 12.5 m/2 – 25 m/2 depending on surface condition

Available sizes: 1L, 2.5L and 5L

For use on Roofing Felt, we recommend you prime the surface using Bitumen Primer before applying the first coat.

Call our friendly sales team on 01257 451 303 or email sales@jhmayor.com for any advice.

SUMMARY

• Ideal for protection against sun and weathering of roofs
• Covers approximately 5 – 10m² per litre per coat, depending upon the surface
• Dries in up to 72 hours, dependent on the ambient temperature
• Apply by brush or airless spray
• Not for use in temperatures less than +5°C
• Clean with White Spirit.
• Available from stock for delivery or free collection
• Craned delivery available